Caliper Painting Prep Kit for EV Owners

• Designed to enhance, protect and restore your calipers.
• Worlds best system to clean, prep and protect your break caliper.
• High-temperature resistance.
• A 3-step rust-stopping system protects against rust and corrosion.
• Trusted by DIY and professionals alike.
• Kit includes: Cleaner Degreaser, Metal Prep, Rust Preventive, Two wooden handle paint brushes and Pair of our special high-dexterity surgical latex gloves

TABSTART

Description

Nothing ruins the appearance of a sharp set of wheels like dirty, corroded calipers lurking from behind. Now dress up those steel or aluminum calipers with a super-tough durable finish using the POR-15 Caliper Painting Prep Kit. Our new caliper painting prep kit makes your new caliper paint coating beautiful and strong enough to withstand the punishment of road debris and temperature extremes, and it looks terrific on any car or truck. Then, whenever your calipers get covered with dirt and brake dust, clean them with anything you like; our brake caliper paint system will stand up to just about anything.

Our 3-step rust-stopping system is a great way to upgrade your vehicle calipers. Providing years of protection against rust and corrosion.

Note: Paint not included in kit. Also be sure to mask all nearby surfaces and to wear a proper respirator when applying the painting prep kit.

BEFORE

AFTER

TABEND

TABSTART

Specifications

With our superior Caliper Painting Prep Kit restore and enhance your break calipers. Making the difference between a quick and short-lasting job to one that will make your vehicle’s caliper’s pop, looking great and will lasting for years to come.

Kit has everything you need to clean and prep your break calipers before painting them. Product made in America.

Kit Includes:

• POR-15® Half-pint of Cleaner Degreaser.
• POR-15® Half- pint of Metal Prep.
• 4 oz. can of POR-15® Rust Preventive.
• Two wooden handle paint brushes.
• Pair of our special high-dexterity surgical latex gloves.

Note: This Kit does not Include caliper paint. You will need to purchase paint separately. Red Caliper paint can be purchased here.

TABEND

TABSTART

Installation

Installation Guide

When used properly, our caliper painting kit offers a superior, and lasting finish. For unbeatable results, the working area should be cleaned and prepped thoroughly. POR-15 Cleaner Degreaser, Metal Prep and Rust Preventive Coating will provide a long-lasting finish while preventing rust and corrosion.

Kit includes :

Two small paintbrushes, Pair of high-dexterity surgical latex gloves, POR-15 Cleaner Degreaser, POR-15 Metal Prep and POR-15 Rust Preventive Coating.

Note: This Kit does not Include caliper paint. You will need to purchase paint separately.

Step 1: Remove all four wheels from the vehicle. Calipers don’t need to be removed. Don’t remove the brake line.

Step 2: Clean surfaces to be painted with POR-15 Cleaner Degreaser. Spray on the cleaner and brush the dirt, grease and grime with a small scrub brush or toothbrush. Wear protective gloves and glasses when cleaning your calipers. Read directions on POR-15 Cleaner Degreaser container before using.

Step 3: Rinse the cleaned caliper thoroughly with water and allow to dry completely. Now apply POR-15 Metal Prep and keep surface wet for 20 minutes and then wash off POR-15 Metal Prep with water and dry thoroughly.

Step 4: Mask off the areas not to be painted. Tape off the brake bleeder screw, brake lines, caliper piston boots, and anything else you don’t want to be painted. This step is VERY important and should be performed with care. When in doubt, mask a surface, even if it is not immediately adjacent to the work area.

Step 5: Open the small can of POR-15 Rust Preventive Coating and stir, making sure the contents are thoroughly mixed. Using a foam brush (included in your kit) paint the caliper evenly, making sure the coating is evenly applied but not to the point where the paint runs. Because this is a rust preventive coating you want to be sure you don’t miss any spots which could rust later if not covered.

Step 6: When the POR-15 Rust Preventive Coating is just dry to the touch, with slight finger-drag remaining, normally in the 2-5 hour range, it’s ready for the POR-15 Caliper Paint to be applied. Open the can of POR-15 Caliper Paint, stir thoroughly, and apply the first coat in thin but even strokes. When the first coat is dry (3 -4 hours), apply a second coat to achieve a beautiful ceramic-like finish.Let dry 24 hours before reassembling wheels and operating vehicles.

Note:  These products should only be handled when wearing latex gloves, eye protection, and NOSHA approved respirators. Always work in a well-ventilated area. 

TABEND

TABSTART

FAQ 

Will the Caliper Painting Prep Kit help with rust? 

Yes. Our 3-step rust-stopping system is a great way to upgrade your vehicle calipers. Providing years of protection against rust and corrosion.

Is the caliper painting prep kit sold as a complete kit ?

No. You will need to purchase caliper paint separately. Kit only includes:

Two small paint brushes, Pair of high-dexterity surgical latex gloves, POR-15 Cleaner Degreaser, POR-15 Metal Prep and POR-15 Rust Preventive Coating.

Will adding the caliper painting prep kit affect caliper breaks in any way?

No. The caliper paint kit is intended to prevent rust and prep area for paint applications.

 TABEND