CLEARANCE: Chrome Trunk Molding Appliqué for Tesla Model 3
Actual Price: $129.95 Discounted Price: $69.95 - Sold Out
These clearance items are for sale ONLY in the contiguous U.S. and available while supplies last.
Products may be demo units, manufacturer samples, or open items. They may have irregular fitment, missing parts, imperfections, and/or light use. Generic photos used may not reflect the current conditions of the items to be shipped.
ALL SALES FINAL for clearance items.
NO ORDER CANCELLATIONS
The Model 3 is a spectacularly cool car—looks, tech, and performance are all there. But in the near future, there are going to be hundreds of thousands of Model 3s on the road, and many owners will want to make their vehicle unique. At EVANNEX, we specialize in doing just that, so we developed the Chrome Trunk Molding for Tesla Model 3. It provides the look and feel of a Model S or Model X for your Model 3.
The Chrome Trunk Molding is a flexible appliqué that has been is designed to be virtually indistinguishable from the OEM automotive trim that is used elsewhere on Model 3, with the thickness, rounded edges, and feel of automotive “chrome.” It presents the “Tesla” name printed with a raised look located directly under the Tesla “T” badge on the rear of the trunk hatch. Note: the Model 3 chrome trunk molding appliqué as seen next to other Model S vehicles (see below).
The Chrome Trunk Molding for Tesla Model 3 is affixed with high strength automotive adhesive and requires no tools, no drilling and very simple placement. It is designed as a permanent addition for your Model 3.
The EVANNEX Chrome Trunk Molding for Tesla Model 3 is a flexible appliqué that has been designed and fabricated to fit the unique curves and dimensions of the Model 3 rear trunk hatch. It is fabricated using plasticized substrate with a chromed overlay and finished with a “domed” high-grade polyurethane coating specially formulated to be abrasion and wear resistant. It is formulated for automotive exterior application.
The trunk molding is backed with an industrial grade permanent 3M adhesive to ensure a strong bond. The trim piece is approximately 31.2 inches wide, 1.0 inches high and 0.11 inches thick (793 mm W x 25.4 mm H x 2.7 mm T). The product is curved to properly fit the curvature of the trunk hatch, but when applied gives the appearance of horizontal trim. The ends of the molding have been designed to complement the curvature of the rear Model 3 lighting assembly.
The thin profile of the Model 3 Trunk Trim piece along with its domed finish ensures that it will have no appreciable impact on airflow over the Model 3 trunk hatch and therefore, no appreciable effect on drag—one of the key factors that affects the range of the vehicle. There is no discernible increase in wind noise. The trim piece is backed with 3M 5849 adhesive, a 20-mil thick, medium-density, dark gray acrylic foam, with TX-1 and DS-4 adhesives on the liner and non-liner sides of the product, respectively), widely used in automotive applications. The adhesive provides a permanent bond to the surface to which it is affixed. The overall cross section of the materials used is shown below:
The polyurethane resin surface has been exhaustively tested to ensure that it can stand-up to environmental conditions.
Once applied, the 3M 5849 adhesive used for the Model 3 Trunk Trim piece can withstand a wide range of outside temperatures. However, for best application results we recommend that installation occur within a temperature range of 60 to 80 degrees, F (15 to 27 degrees, C.
How is the EVANNEX Chrome Trunk Molding for Model 3 fabricated? Is it real chrome?
Today, molded plastic with chrome electroplating is the "chrome" used by most manufacturers, including Tesla. The EVANNEX Chrome Trunk Molding for Tesla Model 3 uses a plastic substrate that is chromed and then finished with a high gloss polyurethane coating. The coating is both sun and weather resistant and is “domed” to provide an aesthetic edge finish and a dimensional feel. Each Chrome Trunk Molding is then backed with 3M 5849 adhesive, providing a strong permanent bond to the automotive surface.
Is the EVANNEX Chrome Trunk Molding a rigid piece of automotive trim?
The EVANNEX Chrome Trunk Molding is a flexible appliqué that uses a proprietary process to give the look and feel of rigid molding. We designed and fabricated the product in this way to allow for easy installation without the need to drill holes in the trunk hatch. Once adhered to the trunk hatch surface, the Chrome Trunk Molding is virtually indistinguishable from a rigid chrome trim piece.
Can I order the EVANNEX 3 Chrome Trunk Molding in a different finish?
The EVANNEX Chrome Trunk Molding is not offered in alternate color or finish.
What is the difference between the materials you use and a vinyl wrap?
A "wrap" is a very thin vinyl material can be adhered to a surface and provides a simulated, faux-chrome look. But it is not a chrome trim piece. A wrap is flat, extremely thin (~4.5 mil) and has no dimensional feel and relatively little visual depth. The EVANNEX Chrome Trunk Molding for Tesla Model 3 is fabricated in a way that makes it virtually indistinguishable from OEM chrome trim, giving your Model 3 a rich look.
Can I install this product myself?
Yes. We’ve designed the EVANNEX Chrome Trunk Molding for Tesla Model 3 for do-it-yourself (DIY) installation. In fact, the only tools you might need are a soft cloth and a cleaning solution of isopropyl alcohol and distilled water (readily available at any large pharmacy). We provide you with a detailed installation video and written instructions. However, if you’re just not a DIY person, the Chrome Trunk Molding for Tesla Model 3 can be installed by any competent aftermarket automotive installer.
Is it possible to slide the EVANNEX 3 Chrome Trunk Molding piece into place as I position it on the Model 3 rear trunk hatch?
In general, the answer is no. The industrial adhesive that we use for each Chrome Trunk Molding creates a very strong and permanent bond. The way to position an appliqué is to adhere it only on its edge to start. That will create a very small contact surface for you to remove it and reposition, if necessary. However, once the Chrome Trunk Molding is pressed into place, it is not intended be removed or repositioned. For that reason, you must very carefully align the piece before you adhere it.
Can you provide a bit more detail about installation?
See 'Installation' tab for more details. Complete installation instructions, video, and guidelines are also provided with each package; please follow the instructions provided to ensure proper installation.
Can I remove the the EVANNEX Chrome Trunk Molding once it has been installed?
In order to ensure that the the EVANNEX Chrome Trunk Molding will not separate from the Model 3 trunk hatch as your car is being driven, it has been designed for permanent installation. It is possible, however, to remove the Chrome Trunk Molding by heating it with a hair dryer and slowly peeling it off. However, the molding will likely be stretched or torn if it is removed, and some adhesive residue may be left on the surface. The residue can be peeled off, and the surface cleaned with acetone. It is possible (but unlikely) that the surface might be slightly marred as a result. Therefore, the Model 3 Chrome Trunk Molding should be viewed as a permanent installation. Additional removal instructions are appended to the installation instructions.
How should I clean the EVANNEX Chrome Trunk Molding?
Soap, water, and a soft, clean cloth should do the trick. If you'd like to provide a lasting shine and protection, we recommend a hand-spray product called Wax-As-U-Dry produced by Eagle One (TM).
Will the addition of the EVANNEX Chrome Trunk Molding affect the aerodynamics of the Model 3 and thereby impact the Model 3 performance and range?
The Model 3 Chrome Trunk Molding rises from the surface by less than 2.7mm. We’ll admit that we haven’t done wind tunnel tests or computer-based simulations, but because of the low profile of the Model 3 Chrome Trunk Molding, any affect on aerodynamics of range would be virtually undetectable.
Will the addition of the EVANNEX Chrome Trunk Molding for Model 3 increase wind noise?
No. The thin profile and tight fit become part of the vehicle surface and will not create any discernible wind nose.
What if I decide I do not like the EVANNEX Chrome Trunk Molding for Model 3 and wish to return it?
BEFORE you install the Chrome Trunk Molding, be sure to assess the look. You can do this using masking tape to attach the Chrome Trunk Molding (without removing the red adhesive backing). If you want to do a more complete assessment, you can use double sided masking tape placed directly over the red adhesive backing of the Chrome Trunk Molding. DO NOT remove the adhesive backing tape until you are satisfied that the look works for you. As long as you have not removed the adhesive backing on the Model 3 Chrome Trunk Molding, it may be returned for a refund (less any restocking charges) within 30 days of purchase. The Model 3 Chrome Trunk Molding cannot be reused once the adhesive backing is removed, and the backing cannot be replaced properly once it is pulled off. For that reason, the Model 3 Chrome Trunk Molding cannot be returned for a refund if the adhesive backing is removed.
What is the Return Policy for the Model 3 Trunk Trim piece?
Once the red adhesive backing has been removed from the Model 3 Chrome Trunk Molding, the product can no longer be returned for credit or exchange. The reason for this is that the Model 3 Chrome Trunk Molding cannot be reused or resold once the adhesive backing has been removed. Therefore, please be certain that you’re satisfied with the look and style of your Model 3 Chrome Trunk Molding BEFORE you remove the red adhesive backing tape from the product. Stated as succinctly as possible, once you remove the red adhesive backing the Model 3 Chrome Trunk Molding, it is yours—no returns and no credit can be offered. Note: If this applies, it must be returned in its original packaging, with shipping and insurance paid by the purchaser. Product Registration must be completed prior to return.
How long does it take to receive my order for EVANNEX Chrome Trunk Molding for Model 3?
The delivery time frame for the EVANNEX Chrome Trunk Molding is between 1 and 2 weeks (for U.S. orders) from the day you place your order, depending on the number of orders in the production queue.
Does the EVANNEX Chrome Trunk Molding for Model 3 ship to International destinations?
Yes, the Model 3 Chrome Trunk Molding ships internationally using FedEx International. For more information including our special terms and conditions for international orders, check out our Shipping and Fulfillment page.
Installation Instructions Video
Please be sure to carefully review this video prior to installation. Once viewed, please be sure to also follow the written instructions (below) step-by-step to ensure proper installation.
Installation Instructions (Slideshare format)
Please carefully read the installation instructions below...
Installation Instructions (PDF format)
Please select the button in order to access instructions in PDF format. Note: we recommend you print these out and have them with you during the installation...
Mai on high
Ask a Question
Have a Question?
*All fields required