CLEARANCE: Sunshades for Tesla Model 3
FREE SHIPPING on orders over $100 within the contiguous U.S.
These clearance items are for sale ONLY in the contiguous U.S. and available while supplies last.
Products may be demo units, manufacturer samples, or open items. They may have irregular fitment, missing parts, imperfections, and/or light use. Generic photos used may not reflect the current conditions of the items to be shipped.
ALL SALES FINAL for clearance items.
NO ORDER CANCELLATIONS
Note: Standard roof does not have any glass above the front seat, it only has glass from the trunk to the rear seats. The Panoramic roof has two glass sections, one above the front seats and one above the backseats. Please see the "Roof Options" tab below to verify your configuration.
Note: Silver Sunshades have white on the inside while Gold Sunshades have black.
The mission for Sunshades for Tesla Model 3 is to make the best-fitting, most durable, and effective sunshades available. These sunshades use a reflective, strong (but flexible) material that is ideal for use as a sunshade. And, Sunshades for Tesla Model 3 consistently perform thorough quality control testing to ensure effectiveness.
25° F cooler on average. The reflective material in the Sunshades are responsible for dramatic temperature differences in cars parked in the sun. Temperature differences of as much as 40˚ F (25˚ C.) have been measured but you should experience a baseline average temperature reduction of about 25˚ F (11˚ C).
Fits like a glove. Sunshades are all about accuracy. It’s computer-driven cutting machines are capable of producing a precise fit for the Model 3. These sunshades are also designed to slightly overlap the windshield frame to maximize coverage and/or to allow the sun visors to have more material to hold on to.
Strong and Simple. These sunshades are stiff enough to be supported by the sun visors alone, but also flexible enough to be bent around the rearview mirror. Unroll the sunshade across dash, lift it into place, and drop your sun visors. For storage, roll up and secure with special Velcro strap.
[See schematic at right]
For the Tesla Model 3 custom sunshades, the design approach is focused on accuracy, precision, and fitment. Computer-driven cutting machines are utilized to produce precise, consistent fitment for every Model 3 owner that orders.
The sunshades are simple to use but they are just as easy to store. Less than 3/16” thick yet stiff enough to stand on their own, they lay flat or roll up for easy storage. It rolls up with a velcro tie when not in use.
These sunshades are made of a special gold or silver metalized polyester film, laminated to a thin layer of closed-cell foam, with a black polyester film back (for blackout extra cooling effect) sewn around the edge with a black cloth binding.
The front windshield sunshade is designed to be supported with sun visors alone. The side and rear window units have 4-5 suction cups for optimal fitment. Note: Sunshades are (depending on placement/install) designed to overlap the windshield frame in places to maximize coverage and to allow the sun visors to have more material to hold on to.
What materials are used to make Sunshades?
The sunshades are made of a special gold/silver metalized polyester film, laminated to a thin layer of closed-cell foam, with a black polyester film back (for blackout extra cooling effect) sewn around the edge with a black cloth binding. This laminate is sturdy, light, and reflective, and it has excellent insulating properties to protect your interior and keep your car cool.
Does EVANNEX offer the most premium sunshades available?
Yes, we carry only the best—our sunshades are custom-made for the Tesla Model S. Gold Series premium-only features include: precision laser cut fitment for your Model 3 with the special black laminate film back for cooling 'blackout' properties, unique gold reflective metalized front, edges sewn with black cloth binding. An added bonus: the product will include a small, original embossed artwork, a tribute to Tesla design, along with the EVANNEX® logo (see image at right).
How are Sunshades made?
The sunshades are custom cut using the latest in computer-aided cutting technology. Then, they are sewn around the edge with a black cloth binding.
In order to fit properly, these sunshades must be bent around my rearview mirror. Will this harm my sunshades?
Bending your sunshades to fit around your mirror is all a part of the simple installation process. The sunshades are designed to fit around the rearview mirror in order to block out as much sunlight as possible.
Which side faces out — the shiny, reflective side?
The shiny, reflective side faces out.
Does the sunshade block UV rays?
The sunshades material is designed to reflect the sun away and it does keep harmful UV rays from penetrating and damaging the dashboard, electronics, upholstery and can keep your Model 3 up to 40 percent cooler.
How should I store my sunshades?
We suggest you store the sunshades rolled up—NOT folded. Folding the Sunshade could compromise the integrity of the material and may cause premature wear.
Do you have patterns for side and rear window sunshades?
Yes, we have side and rear window patterns for the Model 3. Simply select from the pull-down menu (above the orange "Add to Cart" button) which specific sunshade you'd like to order or simply choose the complete sunshade set.
Is there a pattern for the panoramic roof?
Yes, there is a pattern for the panoramic "sun" roof that comes in two pieces to cover both the front seat and back seat areas. You can order it in the pull-down menu. NOTE: this comes as a two-piece set (covering both parts, front and back, of the panoramic roof); you cannot order just one of the two pieces. Also, you can order a complete set with or without the panoramic roof as labeled in the pull-down menu when ordering.
What is the recommended way to get the suction cups on sunshades to best affix to the windows?
It can help to install the suction cups with the doors closed or to hold the door while installing to make a solid connection. We've heard of customers wetting the suction cups for better suction. Also, try to press directly behind the suction cup in order to get a firm grip/suction on the window too.
My sunshades are curled up a bit, is there a way to get them to flatten a bit?
You might want to roll the sunshades in the opposite direction if they have been rolled up for a while. This will help to flatten out the sunshades and make them easier to install and fit better against the windows. Storing them rolled backward every once in a while will also help with this.
I'd like to order a unique combination of sunshades not offered in the pull-down menu above, what do I do?
Simply select the individual sunshade option you'd like and select the "Add to Cart" button. Next, you'll be able to view your shopping cart to confirm your selection. Then, simply go back to shopping on the same HeatShield product page and select the other(s) and "Add to Cart" - now you'll see the combination you desire waiting in your shopping cart. Proceed and follow the prompts to place your order.
How long does it take to receive my order?
Orders are processed and shipped within 2 - 4 weeks from date of order. Note: the sunshade(s) will ship to you via FedEx or UPS.
Do you ship internationally?
Yes! A significant percentage of our orders are outside of the U.S. and we ship via FedEx or UPS International.
Note: Images shown are from the interior of the Tesla Model S — however, install is the same for the Model 3.
With the shiny, reflective gold side facing out, roll Sunshade across dash. Make sure Sunshade is centered in windshield and placed as far down where glass meets dash. Tuck Sunshade behind rearview mirror, if mounted on windshield. Note: It is okay to bend Sunshades.
Lift Sunshades against glass. Adjust Sunshades in windshield, may overlap slightly with side windshield frame (A-pillars) and headliners. Lower sun visors for support.
Set up side window Sunshades (if you ordered for your side windows) by placing suction cups firmly on the each window.
Place rear window Sunshade (if you ordered for your rear window) by sliding it up and pressing suction cups firmly on window.
When not in use, for product storage, store your Sunshades like this: lift sunvisors and pull Sunshades down. Roll up from end to end. For side and rear sunshades, detach suction cups and roll up from end to end. Wrap the attached Velcro strap.
Ask a Question
Have a Question?
Please ask your question below.