The Front Air Dam Protection Kit for Tesla Model S has been designed to protect your front air dam from scratches whether they be caused by curbs or debris being kicked up while driving. At the same time, it provides a more aggressive, lower look for the front of your vehicle improving vehicle aesthetics without spending large sums of money on a front lip spoiler.
— Defend your vehicle's paint and front air dam from debris and curbs.
— Does not require any drilling or screws for installation and can be executed as a DIY (Do It Yourself); See our "Installation" tab for more information.
— Designed to fit the Tesla Model S and account for dips on the front bumper.
— Stylize your Tesla Model S by giving it a lower, more aggressive performance look.
— Alternative to purchasing a more expensive front lip spoiler.
IMPORTANT: The Front Air Dam Protection Kit for Tesla Model S is not a product that is expected to last the "lifetime" of your car (like a spoiler). It is a product that will last only until you've impacted a curb and protected your front air dam. After that point, you'll likely need to reorder the product.
The Front Air Dam Protection Kit for Tesla Model S is meant to protect your air dam curb rash incidents. Upon hitting a curb (even lightly), it's likely the impacted part of the kit will appear "scuffed" and need replacement. If the impact is strong enough the kit may detach from the front bumper. Please note: oftentimes the curb impact will not be loud enough for the driver to notice that impact has occurred. Note: if you see that it needs replacement, you may re-order the product from us again.
Please note: The Front Air Dam Protection Kit can be executed as a relatively straightforward DIY installation, however, professional installation is recommended. See video and instructions below.
What is the intent of the Front Air Dam Protection Kit?
The Front Air Dam Protection Kit for Model S has been designed to protect your air dam from scratches caused by curbs or debris on the road surface. At the same time, it provides a more aggressive, lower look for the front of your vehicle.
Does the Air Dam Protection Kit fit both the Tesla Model S and Model X?
Yes. The protection kit has been designed to be long enough to fit both the Tesla Model S and Model X and can be trimmed to provide a perfect fit.
How is the Front Air Dam Protection Kit attached?
Using very high bond automotive double-sided adhesive tape that is included. Please see our "Installation" tab for complete instructions.
Where is the Front Air Dam Protection Kit attached?
To the plastic underside of the Tesla Model S air dam. We provide a full-length video under the "Installation" tab we recommend viewing.
Will special tools be needed for installation?
The only tools required are readily available in most households—a scrub brush (for cleaning preparation), a hair dryer (to activate the adhesive), and a pair of scissors (to trim the lip once applied). We provide a full-length video under the "Installation" tab we recommend viewing.
Is there special preparation I need to do before installing this kit?
Yes. It is important to have a clean, dust and particle free surface BEFORE you begin installation. Failure to do so will cause poor adhesion of the Air Dam Protection Kit. Please also only install the product when outside temperature is at least 72 deg. F (21 deg. C). We provide a full-length video under the "Installation" tab we recommend viewing.
Can the Front Air Dam Protection Kit become detached?
If properly installed the Air Dam Protection Kit should provide carefree usage over a lengthy period of time. It will not become detached during normal usage. However, if you inadvertently (and often, unknowingly) make low speed contact with a concrete parking barrier, you may loosen and/or damage the protection strip, causing it to become detached. Air Dam Protection Kit is NOT warranted for damage or detachment caused by low speed impact or improper installation.
Can I return the Air Dam Protection Kit if I decide I don’t like it?
Once the red protective film has been removed from the air damn protection strip the product can no longer be returned for credit or exchange. The reason for this is that the product cannot be reused or resold. Therefore, please be certain that you’re satisfied with the look and style of your Air Dam Protection Kit BEFORE you remove the red adhesive backing from the protection strip. Once the red adhesive backing is removed, no returns or refunds will be accepted.
Please ask your question below.