Rear Reflector Trim Pieces for Tesla Model 3
Rear Reflector Trim Pieces for Tesla Model 3
Rear Reflector Trim Pieces for Tesla Model 3
Rear Reflector Trim Pieces for Tesla Model 3
Rear Reflector Trim Pieces for Tesla Model 3
Rear Reflector Trim Pieces for Tesla Model 3
Rear Reflector Trim Pieces for Tesla Model 3

Rear Reflector Trim Pieces for Tesla Model 3

EVANNEX Rear Reflector Trim Pieces add a finishing touch to the reflectors which sit low and recessed as part of your Tesla Model 3's rear bumper on both the driver and passenger side. Custom designed to fit the contoured surface of the reflector recess and sold as a set of two, our Rear Reflector Trim Pieces give your Model 3 bumper a distinctive, performance feel with a gloss carbon fiber look. They can be applied in just minutes with no tools.

TABSTART

Description

EVANNEX Rear Reflector Trim Pieces add a finishing touch to the reflectors which sit low and recessed as part of your Tesla Model 3's rear bumper on both the driver and passenger side. Custom designed to fit the contoured surface of the reflector recess and sold as a set of two, our Rear Reflector Trim Pieces give your Model 3 bumper a distinctive, performance feel with a gloss carbon fiber look. They can be applied in just minutes with no tools.

TABEND

TABSTART

Gallery

TABEND

TABSTART

Specifications

EVANNEX Rear Reflector Trim Pieces are fabricated from high-strength molded plastic with a gloss printed carbon fiber look. The Rear Reflector Trim Pieces have been designed to fit the contours of the reflector recess for Model 3 without interfering with reflectivity in any way. The Rear Reflector Trim Pieces are approximately 3 mm thick and fit over the surface which surrounds the reflector.

The polyurethane resin surface has been exhaustively tested to ensure it can withstand environmental conditions. Overall, our gloss finish "pops" and provides a high-performance carbon fiber look.

The Rear Reflector Trim Pieces have an irregular shape. Each Rear Reflector Trim Piece would fit inside a box approximately 15.5" L x 3.5" W x 1.0" H (394 mm L x 89 mm W x 25 mm H).

TABEND

TABSTART

FAQ

Do the Rear Reflector Trim Pieces for Model 3 come as a set of two?

Yes, you get both the driver and passenger side Rear Reflector Trim Pieces with each order.

Will the Rear Reflector Trim Pieces interfere with the reflectivity of the bumper?

No. 

How are the Rear Reflector Trim Pieces fabricated?

The Rear Reflector Trim Pieces are fabricated from high-strength plastic molded to the contours of the rear bumper, and then printed with a gloss carbon fiber look. The molded cover is approximately 3 mm thick.

How are the Rear Reflector Trim Pieces installed?

The Rear Reflector Trim Pieces are installed using automotive grade, double-sided adhesive tape. The adhesive tape is pre-installed on the inside surface of the Rear Reflector Trim Pieces. The installation should be considered permanent, but the trim pieces can be removed as described in the installation instructions. Installation instructions can be found under the "Installation" tab.

Will the Rear Reflector Trim Pieces change the aerodynamics of the Model 3?

We haven't done aerodynamic testing, but the thin profile, lower rear location, and finish of the Rear Reflector Trim Pieces indicate any aerodynamic affect would be negligible.

Can I install the Rear Reflector Trim Pieces myself?

Yes. We’ve designed the Rear Reflector Trim Pieces for do-it-yourself (DIY) installation. In fact, the only tools you might need are a soft cloth, some masking tape, and a cleaning solution of alcohol and distilled water (readily available at any large pharmacy). We provide you with a detailed installation video and written instructions. However, if you’re just not a DIY person, we'd recommend that the Rear Reflector Trim Pieces be installed by a competent automotive installer.

Is it possible to slide the Rear Reflector Trim Pieces into place as I position it on the Model 3?

In general, the answer is no. The industrial adhesive we use for the Rear Reflector Trim Pieces creates a very strong and permanent bond. The way to position a Rear Reflector Trim Piece is to adhere it only on its edge. This will create a very small contact surface for you to remove it and reposition if necessary. However, once the Rear Reflector Trim Piece is pressed into place, it is not intended be removed or repositioned. For this reason, you must very carefully align the piece before you adhere it.

Can you provide a bit more detail about installation?

See the "Installation" tab for more details. Complete installation instructions, video, and guidelines are available for each package. Please follow the instructions provided to ensure proper installation.

Can I remove the Rear Reflector Trim Pieces once they are installed?

In order to ensure the Rear Reflector Trim Pieces will not separate from the automotive surfaces as your car is being driven, they have been designed for permanent installation. It is possible to remove them by heating each with a hair dryer and slowly peeling it off. However, the adhesive will be destroyed, the cover can become deformed if it is removed, and some adhesive residue may be left on the reflector surface. The residue can be peeled off and the surface cleaned with acetone. It is possible, though unlikely, the surface might be slightly marred as a result. Therefore, each Rear Reflector Trim Piece should be viewed as a permanent installation. Additional removal instructions are appended to the installation instructions.

How should I clean the Rear Reflector Trim Pieces?

Soap, water, and a soft clean cloth should do the trick. If you'd like to provide a lasting shine and protection, we recommend a hand-spray product called Wax-As-U-Dry produced by Eagle One™.

Will the addition of the Rear Reflector Trim Pieces increase wind noise?

No. The thin profile and tight fit becomes part of the vehicle surface and will not create any discernible wind nose.

What If I decide I do not like the Rear Reflector Trim Pieces and wish to return them?

BEFORE you install the Rear Reflector Trim Pieces, be sure to assess the look. You can do this using masking tape to attach the Rear Reflector Trim Pieces without removing the Red adhesive backing tape. If you want to do a more complete assessment, you can use double sided masking tape placed next to the adhesive backing tape. DO NOT remove the adhesive backing tape until you are satisfied the look works for you. As long as you have not removed the adhesive backing on any piece, the Rear Reflector Trim Pieces can be returned pursuant to our Return Policy. The Rear Reflector Trim Pieces cannot be returned for a refund once the adhesive backing is removed.

How long does it take to receive my order?

The delivery time frame is typically within five (5) business days from the date you place your order.

Do Rear Reflector Trim Pieces ship to International destinations?

Yes, the Rear Reflector Trim Pieces ship internationally. For more information, please review our Shipping and Fulfillment page.

TABEND

TABSTART

Installation

Installation of the Rear Reflector Trim Pieces for Model 3 is straightforward and can be performed as a do-it-yourself (DIY) project. However, for those Model 3 owners who are not DIY-oriented, or are uncomfortable with the installation process for any reason, we recommend that the Rear Reflector Trim Pieces be installed by a competent automotive installer. A detailed set of installation instructions is also provided with each order. An install video and written installation instructions can be found below.

Overview and Installation

Written Instructions

For downloadable Instructions on the easy installation (and removal) of the EVANNEX Rear Reflector trim Pieces for Model 3, click on the link that follows:

Download PDF Instructions

TABEND

TABSTART

Ask a Question

Have a Question?

Please ask your question below.

TABEND


Please Confirm You've Read Our Terms

Before we add your item to your cart, we need to confirm you have read and agree with our:

Links will open in new window.

Yes, I Agree. Add to Cart!

No, Please Cancel