TST 20" Wheels for Tesla Model X
More Information

TST 20" Wheels for Tesla Model X

Note: $2,000.00$2,200.00 per set of (4) depending on color selection.

The Model TST 20″ Wheels from T Sportline are specifically designed, engineered, and manufactured to be compatible with the Tesla Model X. The TST is manufactured in a low pressure cast process. Each TST 20″ wheel is load rated at 900 kg. Tesla Model X owners can use a factory Tesla center cap, factory Tesla lug nut and factory Tesla TPM sensor. The TST is fully tested to the SAE J2530 standard. Please select your color option in the pull down menu below. The TST wheels for Model X come staggered with a setup of 20x9.0" Front and 20x10.0" Rear.

TABSTART

Gallery

Please scroll down to view a variety of pictures for each color option.

Metallic Grey

Matte Black

Gloss Black

Brilliant Silver

 

TABEND

TABSTART

Color Options

We’ve included reference images immediately below to showcase the color options available. Please select your color option preference from the pull-down menu above. Available choices include: Metallic Grey, Matte Black, Gloss Black, and Brilliant Silver.

Metallic Grey

 

Matte Black

 

Gloss Black

 

Brilliant Silver

 

TABEND

TABSTART

Specifications

The TST is manufactured in a low pressure cast process. Each TST 20″ wheel is load rated at 900 kg. Model X owners can use a factory Tesla center cap, factory Tesla lug nut and factory Tesla TPM sensor. The TST is fully tested to the SAE J2530 standard.

 

Weight

20×9.0″ ~32.8lbs.

20×10.0″ ~34.8lbs.

Recommended Tire Sizes

265/45-20 for 20×9.0″

275/45-20 for 20×10.0″

TABEND

TABSTART

FAQ

Do the TST wheels retain factory center caps, tpms sensors, and lug nuts?

Yes, the TST wheel was purposely designed with this in mind.

Do I need to change the color of my existing lug nuts/lug nut covers and center cap to correspond to my new TST wheels?

That's an aesthetic decision only you can make. If you decide to use a compatible color, these parts may be purchased from the parts department at your local Service Center.   

Do the grey and silver color variants correspond to the Tesla factory wheels?

Indeed, they are similar and correspond very nicely.  Note: these are not an exact “match” but will be pleasing to the eye in a similar manner as evidenced in our Gallery tab.

Are the TST wheels forged or cast?

The TST wheels are low pressure cast - 900kg.

What is the warranty on TST wheels?

3-Year Structural Warranty. 1-Year Limited Surface Finish Warranty. Please note: we understand many of you pre-order parts prior to the arrival of your Tesla. Kindly inspect each box within 48 hours of delivery to ensure the integrity of your order. Please notify us no later 72 hours if what you received is incorrect or damaged. Any claims made after 72 hours of receipt will not be honored. 

How long until my TST wheels arrive after my order?

We target shipping within 1 to 3 weeks from the date you place your order.

Are these wheels shipped internationally?

Yes!  A large number of our customers are outside of the U.S. International shipping is executed via FedEx International and may be selected upon checkout.

TABEND

TABSTART

SAE J2530

We're proud to note that the T Sportline TST Aftermarket Wheels have undergone rigorous independent testing and meets the SAE J2530 standard. 

Background

A few years ago, SEMA and its Wheel & Tire Council (WTC) worked with the Society of Automotive Engineers (SAE) to develop an industry testing practice for aftermarket wheels. SAE J2530 (Aftermarket Wheels Performance Requirements and Testing Procedures) outlines performance and sampling guidelines, testing procedures and marking requirements for aftermarket wheels used on cars, light trucks and multipurpose vehicles. The document identifies three main areas of testing, including cornering and radial fatigue and impact strength.

SEMA and the WTC strongly support J2530 and urge manufacturers to adopt its recommended practices.

“Consumer safety was the driving force in the development of these guidelines,” said George Finch of Carlisle Tire and Wheel and WTC’s science and technology chairman. “It’s a way for manufacturers who care about safety to differentiate themselves.”

Three test machines are required for the SAE J2530 radial fatigue, cornering fatigue and impact fatigue tests. They are designed to fatigue all of the metal components and design features of an individual wheel.

The radial test fatigues the metal in the rim flanges of the wheel, the section that holds the tire onto the wheel and is loaded through the radial axis of the centerline of the wheel. This test also fatigues the metal in the spoke features of the wheel, which carries the load of the vehicle from the hub to the center disc and then to the barrel of the wheel. With every revolution of the wheel, the components are compressed under load as the test load passes over the tire footprint load point and then relaxes after the load has passed. This movement fatigues the metal through the wheel as if it were mounted on the vehicle.

The cornering test (a.k.a. rotary fatigue) fatigues the metal in the hub and the center disc as it pertains to the mounting pattern all the way out to the connection points of the barrel part of the wheel. This is the most stringent of the three tests, as it exercises the portions of the wheel that are subjected to the most movement under load. This test represents the wheels that steer a vehicle and simulates a cornering maneuver, the point at which wheels are subjected to the greatest cornering forces.

The lateral curb impact is designed to simulate hitting a curb and causing a shock injury to the wheel from the side. The applied impact energy determines if the wheel can sustain an injury from a side impact and not break or crack the rim flange, causing air loss to the tire. This immediate burst of energy can also cause the mounting pattern or center disc to crack, break or separate.

These three tests are staples for benchmark testing in the wheel industry. If any wheel has a design flaw or a material weakness, it will be presented and found during these tests. The SAE and WTC have done a great job in developing this testing standard to establish a set of industry-recommended minimum guidelines for the wheel industry.

TABEND

TABSTART

Ask a Question

Have a Question?

Please ask your question below.

TABEND


Please Confirm You've Read Our Terms

Before we add your item to your cart, we need to confirm you have read and agree with our:

Links will open in new window.

Yes, I Agree. Add to Cart!

No, Please Cancel