Front and Rear Vinyl 'T' Accents for Tesla Owners
Actual Price: $24.95 Discounted Price: $19.95
• Gives your "T" badge a flash of red or carbon fiber to make it stand out from the crowd.
• Available for all Tesla vehicles.
• Each order includes both the front and rear vinyl "T".
• Usually ships the next business day. Available for international delivery.
The "T" badge on every Tesla vehicle is a symbol of the transformational nature of the automobile. The "T" represents a remarkable blend of aesthetics, performance, tech innovations, and zero emissions. For these reasons, many Tesla owners want it to stand out. The EVANNEX Vinyl "T" Accent gives your "T" badge a flash of red or carbon fiber to make it stand out from the crowd. It is available for all Tesla vehicles and each order includes both a front and rear "T".
Both front and rear accents are provided as a set, allowing you to accent the back "T", the front "T", or both, in vinyl red or carbon fiber look. It's easily installed with no tools and can be removed in the future if you decide to return to the original OEM chrome "T".
The photos below show the Tesla "T" Accent for Model Y, Model 3, Model S, and Model X, respectively. The front "T" is shown on the left and the rear "T" is shown on the right.
The EVANNEX Tesla "T" Accent is made using 3M or Avery vinyl film—well-respected in the industry—designed and fabricated for strength, fade resistance, and long life. 3M vinyl films use specially designed adhesives which allow repeated surface placement and removal. Both Vinyl "T" Accents can be heated gently using a heat gun or hair dryer to increase pliability and adhesion.
The shapes of the Tesla "T" were captured and basic surface parameters were fed into our CAD system for refinement. The finished shapes were then cut by a CNC vinyl cutter using software which enables translation of our CAD drawing onto the vinyl. All shapes are accurate to within 0.5 mm.
Vinyl Color Options
Why do I need Tesla "T" Accents?
Simply stated, to change the look of your Tesla "T" badge and make it unique.
Are the Tesla "T" Accents difficult to install?
No, installation is straightforward, but patience and a steady hand are required. Vinyl can be applied and removed a number of times as you install, so a small alignment mistake can be remedied with little difficulty.
I can still see chrome along the very edge of the "T". Is that the way the Tesla "T" Accents were designed?
Yes. We decided to cover only the top surface of the Tesla "T" badge. This means there is a flash of chrome along the edges of the badge.
Are special tools required?
No. However, we do recommend having a spray bottle containing a 60/40 water-isopropyl alcohol mix to ensure proper cleaning and surface preparation, as well as a heat gun or hair drier to help remove any wrinkles and make the vinyl more pliable.
Can I order the front or rear "T" individually?
No. The Tesla "T" Accents are sold as a set and cannot be ordered individually.
Do I need to cut or trim the vinyl?
No. The Tesla "T" Accents have been designed to fit without any requirement for cutting or trimming. However, if you pull a little too hard during installation, it is possible to stretch the relatively thin elements of the "T". If this happens, you can choose to trim the ends using a razor, knife, or scissors.
Do the Tesla "T" Accents wrap around the sides of the Tesla "T" badge?
No. The Tesla "T" Accents sit atop the "T" badge. The sides of the badge remain uncovered, providing a flash of chrome at certain angles we feel adds a nice, aesthetic look.
Do you provide instructions for applying the vinyl kits?
We have developed detailed step-by-step written instructions, as well as produced a detailed installation video, for the Tesla "T" Accents.
Is surface prep complicated?
Not at all. The surface should be cleaned with a 60/40 water-isopropyl alcohol mix applied using a lint-free microfiber cloth or paper towel. The objective is to remove all dust, dirt, and greasy residue before vinyl installation commences.
Can I remove the vinyl if I decide to go back to the OEM surface finish?
Absolutely. Vinyl can be removed at any time.
What is the projected life of vinyl?
Exterior vinyl should have a useful life of three to five years.
Will the vinyl fade with time?
In general, vinyl is impervious to sun damage and will not fade or otherwise discolor.
Will rain, snow, or car washing damage the vinyl?
Can the vinyl be scratched or otherwise damaged during regular use?
In general, vinyl is remarkably strong and resilient. However, if a sharp or abrasive object comes into hard contact with the vinyl, it can be scratched or torn, which is true of just about any surface.
If I decide to remove the vinyl after some period of time, can I reinstall it again at a later date?
No. Once the vinyl has set on the surface (requiring about 24 hours), the adhesion becomes stronger and more permanent. It can still be removed without difficulty, but removal will stretch and potentially tear the vinyl. It cannot be reused.
How long does it take to receive my order?
The EVANNEX Front and Rear Vinyl 'T' usually ships within 24 business hours of receipt of order. Delivery time depends on your location relative to South Florida and is typically within three (3) days for the continental U.S.
Do Tesla "T" Accents ship internationally?
Yes, we ship internationally.
The following installation video is presented using the red vinyl "T" accent for the Tesla Model 3. An identical approach is used for the carbon fiber look and for both the Model Y, Model S and Model X.
Installation Instructions for Tesla T - All Models
To view and download a pdf version of written Installation Instructions, click the button below:
Ask a Question
Have a Question?
*All fields required