Frunk Lift: Pneumatic Hood Supports for Tesla Model 3 Sale
Frunk Lift: Pneumatic Hood Supports for Tesla Model 3
• Replaces existing Tesla Model 3 frunk lift supports with upgraded supports to fully open the frunk in a smooth motion.
• Installation takes less than ten (10) minutes.
• Sold as a pair of supports per order to replace both the driver and passenger side OEM frunk hood supports.
• Add the Trunk Lift to your order for additional savings.
• Usually ships the next business day. Available for international delivery.
The Tesla Model 3 frunk is the perfect place to store small items and the Tesla App is great for opening the frunk remotely. But when the frunk hood opens, it opens just a crack. If your hands are full, you have to juggle the bags or items you’re carrying in order to manually pull open the frunk hood. Our Frunk Lift replaces the existing Model 3 frunk lift supports—an operation that takes less than 10 minutes and requires only a small screw driver—with new supports that will cause the frunk to fully open in a smooth motion when you use your App. Just place your items in the frunk, close the frunk hood and you’re on your way.
The EVANNEX Frunk Lift supports replace the Tesla OEM frunk supports, but use the same OEM latching mechanism. They allow the frunk hood to fully open in a smooth motion when using the Tesla App or in-vehicle controls.
Replacing the OEM frunk lift supports takes less than 10 minutes and requires only a small screwdriver. Simply pry up a pressure band at the end of the OEM frunk lift support using a small screwdriver, pull off the old support and then replace it with the EVANNEX Frunk Lift supports by snapping them into place. The entire operation for both the driver and passenger side support should take less than 10 minutes.
The Tesla Model 3 trunk is the go-to place for storing items big and small, and the Tesla App is great for opening the trunk remotely. But when the trunk hatch opens, it opens just a crack. If your hands are full, you have to juggle the bags or items you’re carrying in order to manually pull open the trunk hatch. Our Trunk Lift replaces the existing Model 3 OEM trunk lift supports with upgraded supports and springs that will cause the trunk to open fully in an automatic manner when you use your App. Just place your items in the trunk, close the trunk hatch and you’re on your way.
The EVANNEX Trunk Lift supports replace the Tesla OEM trunk supports, but use the same OEM latching mechanism. They allow the trunk hatch to fully open in an automatic manner when using the Tesla App or in-vehicle controls.
Replacing the OEM trunk lift supports takes less than 15 minutes and requires only a small and medium size screwdriver. Simply pry up a pressure band at the end of the OEM trunk lift support using a small screwdriver, use the medium screwdriver as leverage, pull off the old support, and then replace it with the EVANNEX Trunk Lift support by snapping it into place. The entire operation for both the driver and passenger side support should take less than 15 minutes.
The EVANNEX Trunk Lift is an integrated solution that includes three components: (1) an upgraded pneumatic strut for greater lifting power, (2) a special spring that provides the vertical force required to initiate upward trunk movement, and (3) a small stainless steel washer that ensure smooth, rattle free movement. All three components come pre-assembled with the EVANNEX Trunk Lift.
For install instructions and further information, visit our product page for the Trunk Lift for Tesla Model 3.
EVANNEX Frunk Lift supports are automotive parts that replace the existing Tesla OEM frunk supports, allowing the frunk hood to fully open in a smooth motion. Each Frunk Lift is a pneumatic cylinder (in actuality, these supports are gas loaded, rather than air loaded, and are sometimes referred to as "gas springs") that is 14.5 in. (36.8cm) long with a maximum diameter of 0.6 in. (1.5cm). It snaps into place using a ball and socket mechanism at both ends. A tension ring holds the ball and socket in place and is actuated using a small blade screwdriver.
EVANNEX Frunk Lift supports are sold as a pair (2 supports per set) to replace both the driver and passenger side OEM trunk hood supports.
How are EVANNEX Frunk Lift supports different than Tesla OEM Supports?
Tesla OEM supports do not cause the frunk to fully open when it is actuated via your Tesla App or from inside the Model 3. The frunk hood opens only a crack and must then be lifted by hand. The EVANNEX Frunk Life Supports cause the frunk hood to fully open in a smooth motion when actuated.
How many Frunk Lift supports are provided?
Two supports are provided as a set to replace the two OEM supports.
Are the EVANNEX Frunk Lift supports difficult to install?
Installation is relatively simple and takes no more than 10 minutes. You use a small flat blade screwdriver to pry up a tension ring that holds the OEM lift support in place and then remove the socket that holds one end in place. The EVANNEX Frunk Lift Support simply snaps into place. We have developed an installation video and detailed written instructions for EVANNEX Frunk Lift Supports.
I noticed that you replaced the OEM frunk supports (struts) one at a time. Why is that?
That’s important. It enables you to work on one side while the frunk hood is supported by the other OEM strut. Once the driver side is replaced, you then remove and replace the other side.
From the video, it looks like the frunk hood lifts fairly quickly when frunk lift supports are installed.. Is that intentional? Is it possible to slow down the opening?
The opening speed is determined by the lift strut—it cannot be changed. WARNING: Do NOT attempt to disassemble or modify the EVANNEX Frunk Lift support. Damage or personal injury could occur.
Could these replacement frunk lift supports cause the frunk to open inadvertantly during driving?
We have tested our frunk lift supports on Model 3 for a number of months and have experienced no issues whatsoever. The OEM frunk hood latch has been designed to hold the hood in place securely and safely. The Model 3 frunk hood has a “striker” that aligns directly with a hood latch mechanism built into the upper part of the front end. When the hood is pressed into place properly, the latch mechanism locks automatically and the frunk hood will not open, regardless of the frunk hood supports that are used. The frunk hood should be opened using either interior controls via the display screen or the Tesla app only when the car is at rest, never when the car is in motion.
I’m really not a DIYer. How long would it take an installer to do this?
Less than 10 minutes. It's a good idea to show the installer our Installation video before doing the installation.
Will the EVANNEX Frunk Lift supports open the frunk hood fully, or do I have to help manually?
The EVANNEX Frunk Lift Supports will open the frunk hood fully without any help from you. The hood opens in a smooth motion. They will hold the hood in place until you want to close it. Closure is accomplished manually by pulling down on the hood.
I noticed that my Tesla OEM supports are slightly longer and have a slightly larger cylinder diameter. Is that a problem?
There's no problem. On some Model 3 vehicles (including AWD configurations), the Tesla OEM frunk supports are slightly longer and do have a slightly larger pressure cylinder diameter. Our replacement supports provide the appropriate upward force to open the trunk lid fully.
Is there anything I need to do when I initiate opening of the Frunk?
The only common sense thing to do is not lean over the frunk hood as it opens. The hood opens reasonably quickly. Take a step back if you're close to the hood.
How do I close the frunk hood?
Using the same approach you’ve always used. Grip the hood with both hands and pull downward in a firm but gentle motion. You’ll notice a bit more closing resistance, but otherwise, the frunk hood closes and locks using the OEM Model 3 hood latch. IMPORTANT: Be sure you hear a mechanical click that indicates the frunk hood latch has engaged.
Can I install Model 3 Frunk Lift Supports on Tesla Model S or Model X?
No! DO NOT attempt to replace Model S or Model X frunk struts with the Model 3 Frunk Lift Supports. The Frunk Lift Supports are compatable ONLY with Model 3.
How long does it take to receive my EVANNEX Frunk Lift order?
The EVANNEX Frunk Lift usually ships within 24 business hours of receipt of order. Delivery time depends on your location relative to South Florida and is typically within three (3) days for the continental U.S.
Does EVANNEX Frunk Lift ship to international destinations?
Yes, the Model 3 Frunk Lift Supports ship internationally.
For downloadable Instructions on the easy installation (and removal) of the EVANNEX car cover for Model 3, click on the button that follows:
Mai on high
EV Revolution Show
"One of the things my wife complained about when we first got our Model 3 was the fact that there wasn’t an automatic trunk lift. It’s a handy feature to have in some circumstances, and it’s something she expected to be included on such a high-tech vehicle. Evannex actually offers automatic openers for the Model 3’s frunk as well as the trunk, and they surprised me when both sets arrived instead of just the rear trunk lifts that I was expecting. "
"The first thing I noticed is that the lifts appear to be high quality, and are at least as good as the original equipment lifts that come with the Model 3. That wasn't surprising as we've come to expect only high-quality products from Evannex. The trunk lifts are definitely beefier and more powerful than the original equipment lifts and they include a thick compression spring to help give the pneumatic lift and initial boost when the trunk is opened."
"The installation process couldn’t be any easier and all you need is a flathead screwdriver... [it's] good deal as far as I'm concerned. Even if you don't use them often for the intended purpose, you'll surely get some kicks showing off how they work to your friends and family."
- Excerpt from product review by Tom Moloughney in InsideEVs, January 9, 2020
EVANNEXFrunk Cooler for Tesla Model X, Model 3, and Model Y
EVANNEXGlove Box Organizer for Tesla Model 3 and Model Y