Frunk And Trunk Lift - Pneumatic Supports For Tesla Model 3 ^Sale

• Replaces existing Tesla Model 3 frunk and trunk lift supports with upgraded supports to fully open in a smooth motion.
• Installation takes less than ten (10) minutes.
• Sold as a Kit (2 Frunk and 2 Trunk) supports per order to replace the front and rear OEM  supports.
•  Buy as a kit for bigger savings.
• Usually ships the next business day. Available for international delivery.
• Fits up to 2023 Model Year - Does not fit Facelift 2024+ Model 3

Description

The Tesla Model 3 frunk and trunk are the perfect place to store small items and the Tesla App is great for opening the frunk remotely. But when the frunk hood opens, it opens just a crack. If your hands are full, you have to juggle the bags or items you’re carrying in order to manually pull open the frunk hood. Our Frunk and Trunk Lift replaces the existing Model 3 frunk and trunk lift supports—an operation that takes less than 10 minutes and requires only a small screw driver—with new supports that will cause the frunk and trunk to fully open in a smooth motion when you use your App. Just place your items in the frunk/trunk, close it, and you’re on your way.

What does the Kit include?

• (2) Frunk Lift
• (2) Trunk Lift

Frunk Lift

The EVANNEX Frunk Lift supports replace the Tesla OEM frunk supports, but use the same OEM latching mechanism. They allow the frunk hood to fully open in a smooth motion when using the Tesla App or in-vehicle controls. 

EVANNEX Frunk Lift supports are automotive parts that replace the existing Tesla OEM frunk supports, allowing the frunk hood to fully open in a smooth motion. Each Frunk Lift is a pneumatic cylinder (in actuality, these supports are gas loaded, rather than air loaded, and are sometimes referred to as "gas springs") that is 14.5 in. (36.8cm) long with a maximum diameter of 0.6 in. (1.5cm). It snaps into place using a ball and socket mechanism at both ends. A tension ring holds the ball and socket in place and is actuated using a small blade screwdriver.

Installation

Replacing the OEM frunk lift supports takes less than 10 minutes and requires only a small screwdriver. Simply pry up a pressure band at the end of the OEM frunk lift support using a small screwdriver, pull off the old support and then replace it with the EVANNEX Frunk Lift supports by snapping them into place. The entire operation for both the driver and passenger side support should take less than 10 minutes.

For downloadable Instructions on the easy installation (and removal) of the EVANNEX car cover for Model 3, click on the button that follows:

Download PDF Instructions

Trunk Lift

The Tesla Model 3 trunk is the go-to place for storing items big and small, and the Tesla App is great for opening the trunk remotely. But when the trunk hatch opens, it opens just a crack. If your hands are full, you have to juggle the bags or items you’re carrying in order to manually pull open the trunk hatch. Our Trunk Lift replaces the existing Model 3 OEM trunk lift supports with upgraded supports and springs that will cause the trunk to open fully in an automatic manner when you use your App. Just place your items in the trunk, close the trunk hatch and you’re on your way.

The EVANNEX Trunk Lift supports replace the Tesla OEM trunk supports, but use the same OEM latching mechanism. They allow the trunk hatch to fully open in an automatic manner when using the Tesla App or in-vehicle controls.

Replacing the OEM trunk lift supports takes less than 15 minutes and requires only a small and medium size screwdriver. Simply pry up a pressure band at the end of the OEM trunk lift support using a small screwdriver, use the medium screwdriver as leverage, pull off the old support, and then replace it with the EVANNEX Trunk Lift support by snapping it into place. The entire operation for both the driver and passenger side support should take less than 15 minutes.

Installation

The EVANNEX Trunk Lift is an integrated solution that includes three components: (1) an upgraded pneumatic strut for greater lifting power, (2) a special spring that provides the vertical force required to initiate upward trunk movement, and (3) a small stainless steel washer that ensure smooth, rattle free movement. All three components come pre-assembled with the EVANNEX Trunk Lift.

For install instructions and further information, visit our product page for the Trunk Lift for Tesla Model 3.