The Law: Front License Plate Bracket for Tesla Model S (Bolt-on)
Actual Price: $129.95 Discounted Price: $89.95
• Designed for use with North American license plates.
• Weather-resistant, easy to install, requires no drilling, and is 100% removable.
• Mounts securely in the air dam honeycomb grill of your Tesla Model S.
• Does not interfere with any of the front mounted proximity and forward-looking sensors.
• Made in the USA.
• Usually ships the next business day. Available for international delivery.
If you live in one of the 31 states (in the U.S.) that require a front license plate, The Law: Front License Plate Bracket for Model S provides an easy solution. The Law: Front License Plate Bracket is a precision, bolt-on product that’s weather-resistant, easy to install, requires no drilling, and is 100% removable. The Law: Front License Plate Bracket is mounted securely in the air dam honeycomb grill of your Model S, allowing it to be easily removed. It is located in an area that does not interfere with any of the front mounted proximity and forward-looking sensors.
Autopilot Compatible. This removable Front License Plate Bracket is compatible with Tesla’s Autopilot functionality and will not interfere with any of the front mounted proximity and forward-looking sensors.
No Drilling. There is no need to drill holes in your front bumper. The Law: Front License Plate Bracket is 100% bolt-on and requires no permanent modification to the vehicle.
No rust, no corrosion and show quality. Hand crafted out of aircraft grade aluminum and comes with stainless steel hardware. High impact powder coat makes it durable for any weather condition.
Above: Map of states (in blue) that require a front license plate
Note: please be sure to select the correct "Model S Configuration" in the pull-down menu above. See photo below as reference...
Refresh front-end (Nov 2016 - Present)
Original front-end (2012 - Oct 2016)
Installation Guide: Refresh front-end (Nov 2016 - Present)
Please select the button in order to access instructions in PDF format. Note: we recommend you print these out and have them with you during the installation...
Installation Guide: Original front-end (2012 - Oct 2016)
Pre-Installation: Locate the upper portion of the grille of the Model S. This license plate kit is designed to be placed in the center location on the upper grille piece. It is strongly recommended that you do not try to force the bracket into any other location on the grille other than the row shown in the photo 1 below. You may run the risk of scratching the paint and/or being unable to remove the bracket in the future. The entire installation process shouldn’t take more than 10-15 minutes.
Quick Start Installation Steps:
Step 1. Locate the center of the upper air dam grille. Using the front Tesla “T” as a center point, identify the center of the grille directly below the “T.”
Step. 2. Insert the nut assembly into the grille by gently pushing it through the "honey-comb" openings in the grill and rotating the assembly upwards so that the threaded nuts face the grill as shown below. Note: There may be a piece of wiring running along the upper portion of the grill noted by the arrow, that may make it difficult to rotate the knot plate assembly into place. Gently push the wire upwards to allow the nut plate assembly to rotate into its proper position.
Above: Photo 1
Step 3. Align the holes in the nut plate assembly with the “honeycomb” openings in the air dam grille. To properly align the threaded holes of the nut plate assembly with the honeycomb openings in the grille, it may be necessary to place a small shim under the base of the nut plate assembly to raise it just slightly. This will allow the 1.25” fastening bolts to be passed through the grille without any problem.
Above: Photo 2
Step. 4. With the nut plate assembly properly positioned behind the grill, add license plate bracket to the assembly (Photo 2). Take to 1.25-inch Allen head bolts and lock washers (provided) and thread the license plate bracket to the nut plate assembly in the grill. Tighten the fasteners until the washers crush. We recommend hand tightening the fasteners. Warning: Do not over tighten the bolts!
Above: Parts included with your front license plate bracket for Tesla Model S
Step 5. Attach your license plate by lining up the two lower holes in the plate and using the remaining smaller Allen head bolts and lock washers and install the license plate to the bracket. Hand-tighten until the lock washers crush. Warning: Do not over-tighten!
Congratulations you have completed the install process.
Installation Video: Original front-end (2012 - Oct 2016)
How is The Law: Front License Plate Bracket attached?
Please see the 'Installation' tab.
Will the Front License Plate Bracket all configurations of the Tesla Model S?
Yes. Please be sure to select the correct "Model S Configuration" in the pull-down menu above. See photo below as reference...
Will the Front License Plate Bracket also fit the Tesla Model X or 3?
This Front License Plate Bracket has been designed for the Tesla Model S. We also have the product available in different designs for both the Model X and Model 3.
Will my license plate be secure?
Yes. The license plate bolts directly onto the Front License Plate Bracket. Lock washers are used to ensure a secure fit.
Can the Front License Plate Bracket be used with European or other international front license plates?
The Front License Plate Bracket has been designed for use with North American license plates and has fastening locations that conform to the dimensions of such license plates. It is not recommended for use with European plates because fastening hole patterns are different.
Will the Front License Plate Bracket get in the way of the forward-looking sensor in the lower air damn grille?
No. The sensor’s forward looking “vision” is not impeded. However, it is important that the license plate be installed correctly as shown in the photos on this page and in the product instructions. If the plate is incorrectly installed and hangs low, it could impede the forward looking sensor.
Will car washes affect the Front License Plate Bracket?
This product was designed for no-touch car wash only.
How long does it take to receive my Front License Plate Bracket order?
The Law - Front License Plate Bracket usually ships within 24 business hours of receipt of order. Delivery time depends on your location relative to South Florida and is typically within three (3) days for the continental U.S.
Does Front License Plate Bracket ship to international destinations?
Yes, The Law: Front License Plate Bracket ships internationally. However, please be sure that your license plate hole pattern conforms to dimensions used for North American license plates. Otherwise, the hole pattern in your international plate will be different.
Ask a Question
Have a Question?
*All fields required